Keep in mind your thermostat is already programmed with the Energy-Star compliant settings. You can try those out for a few days, or continue programming your own custom program below.

Mode Switch must be in HEAT or COOL position.

From HOME screen,
press PROGRAM button to go to the PROGRAM screen.

STEP 2

Set Program Day-
Touch the Day of the week area to to set the day of the week for which
you want to program TargetTemps.


Each tap of the touch screen advances one day.




STEP 3

Set Time Slot -
Touch the Time Slot area to advance the time slot icon to the desired start time.

Each touch advances the Time Slot one increment.




STEP 4

Set Program Time-
Touch the Program Time arrows to set the starting time for the current Time Slot.
Left arrow goes back, right arrow goes forward.

Touch and hold for fast time advance/retard.



STEP 5

Set Target Temp -
Touch the Temp Up / Temp Down arrows to raise and lower the Target Temp for the current time slot.


Touch and hold for fast advance.




STEP 6

Advance Time Slot and repeat -
Touch the Time Slot area to advance the time slot icon to the next start time and repeat steps 4-5 above for the current day. Repeat steps 2-5 for each additional day you want to program.




STEP 7

To copy one days program to another day -

This function automatically copies all 4 Time Slots and the Target Temp for each Time Slot form the selected day to the destination day.

Advance the Program Day icon to the day you want to copy.

Touch COPY, the selected day will display solid and the destination day will flash.

Advance the day icon to the desired destination day. Each touch advances the destination day by one day.

Touch COPY again to execute the copy.





STEP 8

To Review-

Touch REVIEW and the thermostat will auto cycle through each programmed time slot for each programmed day.

The unit will display each Time Slot for a few seconds and automatically cycle through all programmed days.

Touch the Home icon to exit out of the review mode.




STEP 9

Return HOME -
When programming is complete touch the HOME icon to return to the Home screen and run your program.



Installation Complete!

Your system should now be operational.

If your system is still not working correctly, please check all the steps once again.

We can start to check if there is problem in your system by following the Trouble Shooting procedure.

After you have rechecked your steps for installation, and trouble shot your system, you can contact via email.